General Instruments Pressure Transmitter
General Instruments Consortium (GIC) is a leading pressure transmitter manufacturer that offers advanced transmitters designed and produced in-house using imported pressure sensors. Our transmitters incorporate unique anti-interference technology, circuit linearity, and temperature compensation, providing exceptional resistance to interference, improved linearity, and an ultra-low temperature drift coefficient, significantly outperforming standard domestic products. Suitable for measuring gas, liquid, steam, and corrosive media, these transmitters are widely used across industries such as petroleum, chemicals, metallurgy, power, light industry, and machinery. On-site zero-point and full-scale adjustments are available. GIC thrives on quality and builds its reputation on reliability.
Tests:
- Visual Inspection
- Dimensional Verification
- Accuracy Test
- Hysteresis Test
- Leak Test
- Influence Of Mounting Position
- Degree of Protection
- Effect of Mechanical Vibration
- Effect of Mechanical Shock
- Endurance Test With Steady Pressure
- Endurance Test With Over Pressure
- Endurance Test with Cyclic Pressure
- Safety Blow-out Test
- Thermal Stability Test at Rated Temperature
Features:
- The sensor with international advanced level is selected and assembled with
high-precision components through strict process. Therefore, it has small
nonlinearity and good long-term stability within the service temperature range.
- Reliable Weatherproof protection IP67.
- It can be used to measure viscous, crystalline and corrosive media.
- 4 ~ 20mADC standard current signal output, two-wire system.
- Small volume, light weight, convenient installation, commissioning and use.
Performance Parameters:
1. Measuring media: stainless steel compatible gas, steam, liquid
2. Output: 4 ~ 20mADC two-wire system, HART protocol
3. Accuracy: 0.2% FS, 0.5% FS
4. Stability: better than 0.2% FS / year
5. Measurement Range: – 98kpa ~ 60MPa
6. Temperature Influence Coefficient: ± 0.15% FS / 10 ℃
7. Power supply: 12~36VDC
8. Negligible Ambient temperature: -40°C ~80°C
9. Measured medium temperature: -40°C ~80°C
10. Storage temperature: -20°C ~50°C
11. Display: LCD
12. Display module temperature: -20°C~70°C
13. Relative humidity: ≤ 95% RH
14: Load resistance: ≤ 750 Ω
